Skip to main content

Using Automox

Sharing is caring, so we'll share our best practices and tips for using Automox. Ask your questions to make the most of your Automox experience!

  • 616 Topics
  • 2,127 Replies
616 Topics
R
RafaelmspcRookie
asked in Using Automox
SentinelOne installation is not 100% automated.

Hi everyone. Currently I've been able to install SentinelOne via script on MacOS Monterey, the problem is that some permissions still depend on manual user actions.Is there a way to make this step via script as well?Thanks.Missing Permissions Permissions Required: The Agent is requires macOS Notification permissions. Authorize to allow full agent functionality.Missing Permissions Permissions Required: The Agent helper requires Full-Disk-Access permissions. Authorize to allow full Agent functionality.

3
jack.smith
1 day ago
R
RogierRookie
asked in Using Automox
Why does the Automax Windows client install expired certificates?

 

2
R
7 days ago
S
srheinsPro
posted in Using Automox
Duplicate Hosts

I recently noticed that I had over 200 + devices in my default group and now there are duplicate devices in all my groups. Has anyone else experienced this behavior in the past hour?

10
jack.smith
13 days ago
F
Fabio BrigoniNovice
asked in Using Automox
Error execution of scheduled policies.

Hello, I am facing error in policy scheduling. When we create the worklets, we leave the execution scheduled, but the execution does not occur. If we perform the execution manually, the policy applies normally, but the scheduling does not occur.In this case, we have two situations.Situation 1:We created 3 months ago 5 policies to remove specific browsers from linux machines. The policies work perfectly if executed manually, but if we schedule, only 1 of them is executing correctly. All are add in the same group and running at alternate times.Situation 2:We create a policy to add a mandatory software and if we run it manually, it works correctly, but we schedule the execution and the policy does not run. We have already changed it from one group to another, from one machine to another, from one to another Are we doing something wrong? Has anyone experienced this?

11
F
15 days ago
M
Mika TRookie
asked in Using Automox
PDF report with simple list of recent updated software per device

Hi,I am searching for a solution to access and export to PDF a list of recent updated software per device.I check in report section, but it does not corresponds to what I expect.The PDF I need will be sent to customers to report activities.How can I proceed ?Thanks.

1
JohnG-Automox
20 days ago
jbh
jbhPro
posted in Using Automox
How to get a list of systems that have ANY version of a specific app installed?

I am trying to get a list of hostnames that I can put into Excel for systems that have any version of Google Chrome on them. I know I can go to “software” and type in Chrome and pull a list, but the problem is that it returns results in groups, based on the version of Chrome - and there are about 50 different groups/versions… so to get a list of hosts, I’d have to click into each group and copy the hostname. Is there a way to get a simple list of hosts from Automox that have ANY version of Chrome installed?

4
M
20 days ago
S
SophiaAXCommunity Manager
posted in Using Automox
Do you have devices running on MacOS 15 Sequoia?

Automox is closely monitoring how this is impacting our internal devices. At this point, we are not seeing any unintended consequences with the rollout of Sequoia. We have heard that other security tools are unable to maintain a connection. Automox does not run kernel apis, and we are not seeing anything out of the ordinary.

0
S
22 days ago
M
Mika TRookie
asked in Using Automox
Moving Devices from an Automox "zone" to another zone ?

Hi,Is there a way in Automox to change the affected “zone” to an existing devices ?The device is already created,I create a new zone,And I am searching for a solution to affect existing device to this new zone, but I don’t see how. Mayber there is another way to associate device to new zone ? Can anyone help me ?Thanks.

2
M
23 days ago
CallmePH
CallmePHPro
asked in Using Automox
Cert Signing

Have a question on the 1st step needed for PS script signing, the cert install. Is there a way to re-run that, or will it keep running to try and catch offline devices? Got about 90% installed but there are some that came back online that are still showing Not Installed, dont want to move on to the worklet step without all of them good to go!

0
CallmePH
27 days ago
CallmePH
CallmePHPro
asked in Using Automox
No override file found. Patch default values will be used

Having some errors pop up on a handful of pc’s when using the Patch Now Action on the Software page. Have a handful needing 23H2, and while some took the update with 0 issues some are throwing the following No override file found. Patch default values will be usedFailed to set patch values from Metadata. Default values will be used.InstallMSUpdates : Install failed with ResultCode 4 and HResult -2145124318At C:\Program Files (x86)\Automox\execDir149571395\execcmd013954502.ps1:1788 char:21+ InstallMSUpdates $lst+ ~~~~~~~~~~~~~~~~~~~~~ + CategoryInfo : NotSpecified: (:) [Write-Error], WriteErrorException + FullyQualifiedErrorId : Microsoft.PowerShell.Commands.WriteErrorException,InstallMSUpdatesAny ideas on way some will update while others have this error?

8
pplacide
29 days ago
D
dkehoeRookie
posted in Using Automox
FEATURE REQUEST: Fix the calendar

I'm switching from another patching solution and everything is scheduled off Patch Tuesday. I'm noticing that my schedule for November will start patching on the week BEFORE Patch Tuesday. I've also noticed that there are certain days that I cannot patch, for example, I couldn't patch on Sundays this month because the 2nd Sunday this month was a week before my patch window.This way of doing scheduling doesn't make any sense and it needs to be changed. When patching is entirely based off of Patch Tuesday, it would make sense that patching software works off of that schedule as well.

3
C
1 month ago
B
blastbeat914Rookie
asked in Using Automox
Power Bi DataFlow

Hi, I'm trying to create a dataflow with power bi but I'm having trouble connecting to automox from the dataflow page. I was able to pull this data successfully VIA instructions in other post, but this only works for pulling in data to the desktop power bi. Can't create dataflow from that. Any assistance please? 

1
B
1 month ago
J
jake.gRookie
asked in Using Automox
Automox Communication Exclusion in Crowdstrike Network Containment Policy

Hello,I am seeking assistance to exclude Automox from Crowdstrike Network Containment Policies, allowing the Automox agent to communicate with the cloud even when containment/isolation measures are in lift.Crowdstrike Falcon presently accepts only IP ranges for Network Containment Policy input due to security concerns related to domain names, as detailed here: Crowdstrike Discussion.Automox provides a list of URLs used for agent-cloud communication, outlined in this guide: Automox Agent Firewall Allowlisting Rules. I am exploring methods to obtain Automox Cloud's IP range for exclusion. Would it enough to use the IP result from "nslookup api.automox.com"? Please give some advice, many thanks!Best regards.

1
T
1 month ago
T
ThurstonRookie
asked in Using Automox
Apply Patches That Do Not Require Reboot Only.

Hello, I am trying to create two separate advanced policies and schedules based on a condition “Requires Reboot” Y/N.I want to have a policy that will apply patches that do not require a reboot.  I want to have a second policy that applies Patches that require a reboot.   Looking in the Advanced Policy options I cant figure out how to create this conditional policy.  Is there any guidance or advice that someone could offer? BTW, the only alternative I have looked at is to setup a policy where i select “Do not enable automatic restart after updates are installed”.  What i have found is that applies patches and ends up with a list of systems that are in a “Needs Reboot” status. 

1
I
1 month ago
jasonehand
jasonehandNovice
asked in Using Automox
Option for Windows Optional Updates

I can see the option to install all updates greater than Low Severity.Is there a way to scan for “Optional Updates” like you see in the PC’s Windows Updates section?

1
JohnG-Automox
1 month ago
jasonehand
jasonehandNovice
asked in Using Automox
Is there a way to scan for & update Workstation Bios when available

We’re a Dell shop and have all Dell Workstation and Laptops.I know there’s a way through the Dell utility to update the bios when updates become available.Is there a way through Automox to scan for available Bios updates and remotely install them for everyone?

1
MarkH-Automox
1 month ago
A
AOkanovicNovice
asked in Using Automox
Automox + Deep Freeze

Good morning!I just wanted to ask if anyone has had experience using Automox in an environment that has Deep Freeze enabled on some computers. I noticed Deep Freeze will keep the Windows Update service and BITS in a “Disabled” state throughout the day while the computer is frozen, but is supposed to turn it back on during the thaw periods overnight. I’m wondering if the Windows Update and BITS services being shut down all day could be what is preventing these systems from updating correctly, even though the services get turned back on overnight. This seems to happen even if Deep Freeze is told to completely avoid doing anything with Windows Updates. Thanks!

4
sing007
2 months ago
sparrowhawk
sparrowhawkNovice
asked in Using Automox
Vulnerability platform integration

Hi Automox community, I’m investigating ways in which we might improve our patching and remediation. We currently have Tenable VM, which is ok but doesn’t easily integrate with Automox in my experience as I have to import/export csv files. My cloud team are trying out Datadog, which they are really keen on, but does anyone here use it and have you been able to integrate it with Automox?I know Lansweeper and Rapid 7 integrate with Automox, but they aren’t on my cloud teams radar at the moment. Does anyone use either of these solutions? How do you find them?If we can’t find a product that easily integrates with Automox, then maybe we can build something. We’d like some way to extract the vulnerabilities from whatever scanning solution we have, stick that data in a database so we can exclude things, then use the Automox API to target devices that require that particular patch. Has anyone here build anything like this?Thanks

1
L
2 months ago
D
David_MitchellNovice
posted in Using Automox
Feature request to fix Console to Endpoint communication after unexpected reboot or network disruption

I have noticed that if a Windows endpoint unexpectedly reboots or there is a network disruption while processing a worklet or worklets, the Console will lose the ability to communicate to the endpoint for around 24 hours. That's how long it takes for the back end console maintenance to run and reset things. Even removing the device from the console and reinstalling the agent has no effect. The device is still stuck on stupid in the console. We would love to have a feature to reset the communication immediately so we can continue to work on systems without having to tell users they now have to wait until tomorrow for what they need. Even if its an api feature, that would be fine. Is this causing anyone else headaches? We use worklets to push software to endpoints and are in there daily doing that. I don't know that this would bother customers that are just using Automox for Windows updates. If others are having problems though, maybe Automox can help us out. I am tired of opening ticket

1
JohnG-Automox
2 months ago
S
Savita PrajapatiRookie
asked in Using Automox
Automox Remote Control Not working

Hi Team,I am having issue while trying to remote connect to user's computer. When I click on Remote Control from Device Page, it starts initializing and ask prompt to user. User accepted the prompt, and it connected but within a second, it just disconnected.Then I click on Reconnect button on top and it establish connection and get sudden message says - “Unauthorized to start a Remote-Control Session”I did try to scan computer and also restart computer manually but still having a same issue while attempting to remote control.I read few Automox article and found below information. Authorization failed Org does not have an Account ID (That means the organization was not migrated to Global Zone Management) Your role does not have permission to use Remote Control JWT minting service might be down However, I am still not able to understand the cause. I have also checkFirewall link: https://help.automox.com/hc/en-us/articles/5352219184020-Agent-Firewall-Allowlisting-RulesRemote control w

0
S
2 months ago
C
csmith6Rookie
asked in Using Automox
Windows - Manually Click "Check for Updates"

Hi all,Last night we had a system reboot unexpectedly.  The policy used on this system is set to never reboot.  The end user told me that they manually went into Settings → Updates → Check for updates before they left for the day, which triggered a CU to download/install.  My question is, if a user manually checks for updates, clearly this overrides the Automox update policy.  But, does this also override the Automox reboot setting which is configured in the policy?   Thanks in advance for any help!

3
K
2 months ago
R
RoobusBoiNovice
posted in Using Automox
Feature Request - Tag Management

This I feel is especially important for those who manage consoles of multiple offices/entities. As each organization has their different nomenclatures and tagging practices, the only ways you can effectively track down all existing tags in the environment is by going to the Devices section and double clicking the Tags column, this will present all devices tagged in descending order, or by using the Actions option and clicking on Apply Tags (Read-only users can’t assign the tags but can see them). Lastly one can fetch a CSV report from the Devices tag and find from there. Point is, natively from the cloud console, there is no “dedicated” way. It would ideal if Zone Operators, Admins could create tags arbitrarily (like as it is right now) but one can also check existing tags and which devices have been tagged with them, kind of like the Groups subsection in the Manage section. 

0
R
2 months ago
V
victor.tremeaRookie
asked in Using Automox
Delete file in privileged folder like system32

Working in a script able to delete files in privileged folder like system 32. But getting “File '\Windows\System32\Tryme\new 2.txt' does not exist.” on the script bellow. According to the reponce on  this: Automox runs as SYSTEM so this issue is unlikely related to elevated privileges.Any suggestions? What am I missing here?  Evaluation Code:Exit 1 Remediation code: $filePath = "C:\Windows\System32\Tryme\new 2.txt"# Check if the file existsif (Test-Path $filePath) {    try {        # Attempt to delete the file        Remove-Item -Path $filePath -Force -Recurse        Write-Output "File '$filePath' has been successfully deleted."    } catch {        # If an error occurs, display the error message        Write-Output "An error occurred while trying to delete the file: $_"    }} else {    # If the file does not exist, inform the user    Write-Output "File '$filePath' does not exist."}

2
V
2 months ago
D
DHERTERRookie
asked in Using Automox
Deploy Dell SupportAssist OS Recovery

With the recent events in CrowdStrike world, we have all Dell enpoints and found that they could not get into the winRE without the SupportAssist OS Recovery to fix issue. Is there a way to deploy this tool via Automox? 

1
JasonK-Automox
2 months ago
T
TomvVeldRookie
asked in Using Automox
Automox FreshService integration

Hello,I am currently trying to integrate Automox with FreshService but when i search for a device that is compliant within Automox and also is a Asset within FreshService the Automox app within FreshService keeps saying: “The Device does not exist in Automox”. I configured the API and set the schedule to run daily at 12:00 AM but it has been a couple of days now and still no information is displayed.Has anyone here have any experience in setting up this integration?  

2
A
2 months ago
Terms & ConditionsCookie settings